MOTUL RBF 660 Racing Factory Line DOT 4 100%
Synthetic Brake Fluid may be used for all types of hydraulic brake and
clutch actuators requiring non-silicone synthetic fluid. Specially
designed to resist to extreme temperature generated by racing carbon and
ceramic brakes allowing to minimize air entrance for brake cooling. Can
also be used with conventional steel rotors and clutch systems. Widely
exceeds DOT 3, DOT4 and DOT 5.1 standards (except for DOT 5.1 viscosity
at - 40°C).
Extreme thermal resistance and stability:
high boiling point (325°C / 617°F), superior to conventional DOT5.1 non
silicone base / DOT5 silicone base fluids (260°C / 500°F mini) and DOT4
(230°C / 446°F mini)
Enables effective brake even in extreme conditions.
Efficient when rainy:
high wet boiling point (204°C / 400\°F) superior to conventional DOT
5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C /
311°F mini enables to keep efficient braking while rainy. Brake fluids
tend to absorb humidity from the air, which reduce boiling point and
increase the risk to get vapour lock phenomena. The wet boiling point is
measured by humidifying the product with about 3.5 % of water.
Avoid mixing with polyglycols based brake fluid.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to prevent moisture absorption.
Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.