This is the complete kit to swap 2011-2013 Regal F40 six speed transmission into your car. We only use new parts in this kit. The billet mounts are designed to use a rotated rear transmission mount. If you don't have one you can install a spacer under the mount. This transmission includes a speed sensor in it. The tooth count on the gear is different so the engine computer will need to be updated for the speedometer to be accurate.This kit can use the factory passenger side axle. Some drivers side axles have not been able to compress far enough so we are offering custom axle options. The only modifications required on your part are to cut and swap the rubber grommet from the factory shift cables to the f40 shift cables.
Things that are different between our kit and others on the market.
We modify the transmission case to accept an internal speed sensor. They use an external sensor on the intermediate shaft.
We include the a billet engine mount(option) and billet upper transmission mount. They don't include the engine mount and you have to modify your stock upper transmission mount for their kit.
We have the option for an in car short shifter that uses your factory boot. They include the stock regal shifter and knob which is out of place in a performance vehicle.
We include billet machined base bushings. They include a stud welded to sheet metal.
Includes:
Regal F40 Transmission (OPTION)
Intermediate Shaft
Upper Mount Bracket
Shift Cable Bracket
Billet Engine Mount (OPTION)
Billet Upper Trans Mount
Billet Front Mount
Billet Rear Mount Adapter
Regal shifter cables
OTTP Regal short shifter (OPTION)
Clutch and Flywheel (OPTION)
Wavetrac LSD (OPTION)
Custom Axles (OPTION)
Regal shifter base
Installation Information:
Level of Difficulty: HardInstall Time: About 12 Hours
Tools Required: Basic Shop Tools, Hoist
Vehicle Fitment:
Fits Model Year: 2005+ Ion, 2005+ Cobalt, 2008+ HHR SS
You
will need 2.2 quarts of transmission fluid to install this kit. We
recommend Redline MTL. Depending on your clutch you will also need
flywheel bolts and pressure plate bolts.
This kit is built to order/special order and cannot be cancelled or returned. Please allow 3-4 weeks for this kit to be assembled and ship.
The transmission in this kit doesn't have a warranty. It is a new overstock transmission and as such gm doesn't warranty them.
Shipping for this kit does not include lift gate delivery and is an estimate. You will be billed actual shipping when the product ships. If you need lift gate service it does cost about $100 more.
